Below is a list of chimney components that are compatible with this item. If you are comfortable picking the components that you need for venting this item, please choose from the items below. If you need any help at all, please use our FREE advice from our certified fireplace specialists.
Includes heat-circulating blower with variable speed and thermostatic control
Download the eFire remote app for total control of your fireplace from your mobile device
Technical Specifications
Maximum BTU Output: 36,500
Min/Max Natural Gas Inlet Pressure: 4.5" / 7" WC
Min/Max Propane Inlet Pressure: 11"/13" WC
Framing Dimensions: 35 3/4" W x 43 5/8" H x 19" D
Venting Dimensions: 5" ID
Approved Direct Vent Systems: Duravent, Amerivent, Direct Temp, SureSeal
Actual Viewing Area: 25 3/4" W x 30 11/16" H
Valve Type: IPI (Intermittent Pilot)
*Venting Requirements: This unit requires venting pipe with an inner diameter of 5 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
Climb new heights with Napoleon! The Napoleon 36" Altitude X Direct Vent Fireplace is as stunning as it is functional. This fireplace comes packed with features and options that will make installation a breeze, allowing you to choose from four log sets, six decorative panels, four fronts, and several other elements to customize your fireplace's look. It also comes with an optional eFIRE remote app, which gives you control of your fireplace from your smartphone. So get peak performance with Napoleon!
Can you tell me if this is a zero clearance fireplace or not?
1 Answer
That's a tricky question. Some of the surfaces have a 0" clearance to combustibles. Other surfaces have other clearances. This is true of most fireplaces. You can find the specific clearances in the installation manual. This is designed to be installed into a wood frame structure with certain limitations as detailed in the installation manual.
Do you need a decorative front and a trim kit? Or is it an either-or for most installations?
1 Answer
Neither a decorative front nor a trim kit is required for installation. You must only add a log set and an interior liner and the necessary venting components for installation.
Submitted by:Tyler M. - NFI Master Hearth Professional on November 24, 2020