Napoleon High Country NZ3000H-1 Wood Burning Fireplace

With this convenient chimney pipe, you can connect DuraPlus to most zero-clearance and masonry fireplaces that are available on the market. Included in this package is a 5"-8" chimney pipe that is a double-wall, all fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas, and zero-clearance fireplaces that are factory-built. This design is ideal for use with chimney pipes with a 7" inner diameter and comes with a limited lifetime warranty. Let DuraTech take care of all your appliance connection needs with this chimney pipe design.

The DuraTech Firestop Radiation Shield is here to help you with those non traditional chimney piping projects. When your chimney passes through a ceiling or floor without a ceiling support box, this radiation shield is a required purchase. The durable galvanized steel construction will give you assurance that the DuraTech FireStop Radiation Shield will hold up for years to come and it even comes with a limited lifetime warranty. When you are performing a non traditional chimney piping project, use the DuraTech FireStop Radiation Shield to meet the requirements and give you maximum durability.

Sometimes, the most important aspects of the installation process are the ones that tend to unwittingly get overlooked. The DuraTech All-Fuel Galvanized Attic Insulation Shield is designed to make sure that your attic is protected from your fireplace as it is burning away, trying to keep your living room warm. It is designed to be used with Chimney Pipes with a 7-Inch Inner Diameter, making sure that their operation does not endanger the well being of your home.

This aluminum roof flashing can be used with all chimney termination that are vented through your roof. It can used with all fuels. This flashing is made by Dura Tech and will work with perfect compatibility with Dura Tech chimney pipes with seven inch inner diameter. This flashing is made to be used on pitched roofs from 0/12 pitch to 6/12 pitch. The Aluminum Roof Flashing gives you everything you need for a simple installation.

Terminating a chimney on a steeply sloped roof is not the easiest thing in the world to do. Fortunately, it is made a little easier with the DuraTech Aluminum Steep Roof Flashing. This flashing protects chimney pipes vented through the roof and is designed to repel water and moisture damage. The durable aluminum construction guarantees that it will last for a while to come, in fact, it comes with a limited lifetime warranty. *Please Note: A separately purchased Storm Collar is required for installation.

Flashing protects both the chimney pipes and your roof from the unwanted entrance of water through the vent hole. This part is made of durable aluminum and designed for use with the 7" DuraTech chimney pipe system. It is suitable for use on flat roofs only and carries a limited lifetime warranty when installed correctly. Others parts may be necessary to create a complete vent termination. The DuraTech chimney pipe is rated for use with all fuels.

Is your chimney ready and protected for winter weather? Chimney flashing is a great way to provide protection for your chimney system. Finding a good weatherproof seal that protects the pipe can be difficult though. This DuraTech All Fuel chimney storm collar provides utmost protection and is designed to withstand high heat temperatures. This storm collar was created for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, and other appliances fueled by wood, oil, coal or gas. This collar is made of durable aluminum construction, and comes complete with a limited lifetime warranty. It was made for 7 inch and 8-inch DuraTech chimney pipes.

DuraTech makes durable factory built chimney systems and components, and this all-fuel chimney cap is one of those components. This chimney cap is designed for use with chimney pipes that have a 7-inch diameter and will protect the chimney termination from rain and wind damage, as well as prevent small pests from entering your chimney or flue, causing expensive damage. This chimney cap is easy to clean, and UL listed and tested for use with a 2100 degree chimney system-such as fireplaces, wood stoves, furnaces, boilers, ranges and water heaters.

If you have a DuraTech All-Fuel chimney installation that requires your piping to extend above the roof, this extended roof support should be used to keep the chimney system stable. The item adjusts from 67" to 114" for use in a variety of situations and will fit 7" DuraTech chimney pipes. The DuraTech system can be used to vent appliances that are require a 2100° F chimney system, which would include wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances that use wood, oil, coal, or gas for fuel.

Are you completing the installation of a DuraTech chimney system for your new appliance? This all-fuel chimney roof support kit provides the structural reinforcement necessary when directing a DuraTech chimney through a roof. The handy venting accessory adjusts to different roof pitches and is designed for use with 7" DuraTech chimney pipes. It can support up to 45' of pipe above and 20' of chimney below, and it comes with a limited lifetime warranty. The system is tested for use with any 2100 degrees Fahrenheit chimney system.

A chimney needs to be properly secured or else it is susceptible to failing and causing a huge mess. With the DuraTech All-Fuel Adjustable Galvanized Chimney Pipe Wall Strap, you have a device that has been designed to take Chimney Pipes with a 7 inch inner diameter and make sure that they stay put so that every time you decide to get a fire going in your fireplace, you can do so without any concern whatsoever about the stability of your chimney.

Keeping a chimney installation safe, stable and secure is a top priority. This is the main feature of this chimney pipe wall strap. This wall strap is adjustable to meet all the variables of an installation. It is also made from strong and durable stainless steel to resist corrosion. This accessory for chimney venting can be adjusted to give you anywhere from a two inch clearance to a six inch clearance. This product is meant to be used with Dura Tech chimney pipes.

When you want extra strength in your Dura-Vent DuraTech installation, you need the right Locking Band for the job. This 7-inch inner diameter locking band for your DuraVent DuraTech factory built chimney is a perfect example. It is an optional way to connect 7-inch diameter sections of DuraTech when you want a little extra strength. It has been tested and listed to UL 103HT Standard for wood, oil, coal, and gas. For extra strength, durability, and security, you can't go wrong with this Locking Band.

Is your chimney ready and protected for winter weather? Chimney flashing is a great way to provide protection for your chimney system. Finding a good weatherproof seal that protects the pipe can be difficult though. This DuraTech All Fuel chimney storm collar provides utmost protection and is designed to withstand high heat temperatures. This storm collar was created for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, and other appliances fueled by wood, oil, coal or gas. This collar is made of durable aluminum construction, and comes complete with a limited lifetime warranty. It was made for 7 inch and 8-inch DuraTech chimney pipes.

Passing DuraPlus All-Fuel chimney piping through an attic? Then you need a Galvalume Attic Insulation Shield. This venting accessory ensures any home's safety by preventing debris and insulation from accumulating next to chimney pipes. Shield comes with a firestop, base, and collar.

Applications - DuraPlus Chimney is a triple-wall, all-fuel chimney for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas.

Materials and Constructions - .016" 430 stainless steel outer wall or .018" galvanized steel outer wall. .018" aluminized steel intermediate liner. .016" 430 stainless steel inner liner. Two insulating layers (ceramic blanket plus air space). Locks tightly with a precision twist-lock connection.

Clearances - 2" clearance to combustibles.

Listings - UL Listed to UL 103 (MH7399).

DuraVent Item Number: 6DP-IS

Storms bring with them the prospect of causing a great deal of damage to your chimney, but with the DuraPlus All-Fuel Chimney Storm Collar, you have the needed device to take Chimney Pipes with 6-Inch and 8-Inch Inner Diameters and make sure they are well protected at all times. After, all, if you have invested a lot of money in your fireplace, the last thing that you want to have happen is for it to be ruined.